Living and Home Quartz Resin Composite Kitchen Sink with Rounded Corners - Black
Make everyday kitchen tasks easier with this sleek double-bowl kitchen sink. Featuring two separate basins, it makes washing and rinsing effortless while food prep stays organised and uninterrupted. An integrated drainer on the right provides a convenient space for drying plates, cutlery and freshly rinsed ingredients. Smooth rounded corners keep water flowing and reduce hard-to-reach grime, so cleaning feels quicker after busy cooking. A complete waste kit Included for straightforward, easy installation and a hassle-free setup.
Features:
• [Quartz Resin Composite Build]: One-piece construction resists daily wear, stains and high temperatures.
• [Standard 35mm Tap Hole]: Pre-drilled opening enables quick tap installation without additional modifications.
• [Overflow Protection]: A built-in overflow port helps prevent accidental water spills when the sink is left unattended.
• [Clog & Odour Control]: A removable basket strainer catches food debris, while a lid blocks odours and holds water when needed.
Specifications:
Overall Dimensions: 115cm (W) x 49cm (D) x 21cm (H)
Pre-Drilled Faucet Hole Diameter: 35mm
Overflow Hole Diameter: 30mm
Material: Quartz Resin Composite + 201 Stainless Steel
Colour: Black
Shape: Rectangular
Type: Double Bowl
Number of Tap Hole(s): 1
Tap Included: No
Installation Type: Under-mount
Assembly Required: Yes
Package Content:
1 x Double Bowl Sink
1 x Waste Kit
Notes:
- Lift with care. The sink is heavy. Use proper lifting techniques or seek assistance to avoid back strain or injury.
- Always wear eye protection and cut-resistant gloves when cutting the countertop or drilling holes. Flying debris or tool slips can cause serious injury.
Installation Instructions:
- Turn the sink upside down and place it in exactly the place on the countertop where you want to install it.
- Measure the width, length and depth of the sink.
- Make sure the new sink will be sufficient space to install a battery outlet located under the sink.
- Mark the location of the sink by tracing its perimeter. Then remove the sink from the countertop.
- Draw a cut line inside the perimeter that will copy the original wrap around the sink, but it will be shifted by 12 mm.
- If the sink comes with a template for the sink cutout, use the template for tracing.
- In this case, make sure you have a template placed in the right way.
- When you are sure of the placement, at any point along the cut line, drill a hole big enough to accept the blade from your jigsaw. With a jigsaw, cut the opening along the cut line (the line inside the sink's perimeter line).
- Before stamping the faucet's hole, check the place of the predrilled hole at the bottom.
- Using the drill with a dill bit ø3 mm drill holes around the edge of the pre-drilled hole. Hold a sharp pointed object (in any case, a screwdriver) and a hammer and strongly wallop in the middle of the predrilled hole. Then cleans up the hole fine with rasps.
- Before installing the sink, apply sanitary silicone (not included) on its inner edge.
- Carefully flip the sink and insert it into the hole of the countertop. Then install the other parts of the siphon.
Make everyday kitchen tasks easier with this sleek double-bowl kitchen sink. Featuring two separate basins, it makes washing and rinsing effortless while food prep stays organised and uninterrupted. An integrated drainer on the right provides a convenient space for drying plates, cutlery and freshly rinsed ingredients. Smooth rounded corners keep water flowing and reduce hard-to-reach grime, so cleaning feels quicker after busy cooking. A complete waste kit Included for straightforward, easy installation and a hassle-free setup.
Features:
• [Quartz Resin Composite Build]: One-piece construction resists daily wear, stains and high temperatures.
• [Standard 35mm Tap Hole]: Pre-drilled opening enables quick tap installation without additional modifications.
• [Overflow Protection]: A built-in overflow port helps prevent accidental water spills when the sink is left unattended.
• [Clog & Odour Control]: A removable basket strainer catches food debris, while a lid blocks odours and holds water when needed.
Specifications:
Overall Dimensions: 115cm (W) x 49cm (D) x 21cm (H)
Pre-Drilled Faucet Hole Diameter: 35mm
Overflow Hole Diameter: 30mm
Material: Quartz Resin Composite + 201 Stainless Steel
Colour: Black
Shape: Rectangular
Type: Double Bowl
Number of Tap Hole(s): 1
Tap Included: No
Installation Type: Under-mount
Assembly Required: Yes
Package Content:
1 x Double Bowl Sink
1 x Waste Kit
Notes:
- Lift with care. The sink is heavy. Use proper lifting techniques or seek assistance to avoid back strain or injury.
- Always wear eye protection and cut-resistant gloves when cutting the countertop or drilling holes. Flying debris or tool slips can cause serious injury.
Installation Instructions:
- Turn the sink upside down and place it in exactly the place on the countertop where you want to install it.
- Measure the width, length and depth of the sink.
- Make sure the new sink will be sufficient space to install a battery outlet located under the sink.
- Mark the location of the sink by tracing its perimeter. Then remove the sink from the countertop.
- Draw a cut line inside the perimeter that will copy the original wrap around the sink, but it will be shifted by 12 mm.
- If the sink comes with a template for the sink cutout, use the template for tracing.
- In this case, make sure you have a template placed in the right way.
- When you are sure of the placement, at any point along the cut line, drill a hole big enough to accept the blade from your jigsaw. With a jigsaw, cut the opening along the cut line (the line inside the sink's perimeter line).
- Before stamping the faucet's hole, check the place of the predrilled hole at the bottom.
- Using the drill with a dill bit ø3 mm drill holes around the edge of the pre-drilled hole. Hold a sharp pointed object (in any case, a screwdriver) and a hammer and strongly wallop in the middle of the predrilled hole. Then cleans up the hole fine with rasps.
- Before installing the sink, apply sanitary silicone (not included) on its inner edge.
- Carefully flip the sink and insert it into the hole of the countertop. Then install the other parts of the siphon.
Delivery Options
Economy Delivery (UK) — £3.99 Delivered in 4–7 working days.
Standard Delivery (UK) — £4.99 Delivered in 2–4 working days.
Next Day Delivery (UK) — £7.99 Delivered the next working day on selected items. Terms & conditions apply.*
How Next Day Delivery Works
Upgrade your order to Next Day Delivery and receive your item(s) the next working day.
Orders placed by 9pm, Monday to Friday will arrive the next working day.
Scottish Highlands & Northern Ireland postcodes:
Orders placed between 9pm Friday and 2pm Sunday will be delivered on Tuesday if you live in the following areas: AB, BT, DD, EH, EX, FK, G, IV, IoM, KA, KY, ML, PA, PH, PL, TD, TR.
Remote postcodes (two working days): Our Next Day Delivery service takes two working days instead of one for the following postcodes: HS2, KW16–17, PA61–PA75, PA78, PH30, PH41–44, ZE2–3.
Ireland & The Channel Islands:
All orders to Ireland and the Channel Islands are eligible for standard delivery at a fixed fee of £7.95.
Channel Islands: Standard delivery in 3–4 days (£7.95), or Express delivery in 2 days (£9.50).
Republic of Ireland: Delivery within 7–10 days.
Unfortunately, Next Day Delivery is not available to Ireland or the Channel Islands.
Marketplace Items
The BrandAlley Marketplace allows our carefully selected partner sellers to offer you an additional range of products. Marketplace items are clearly labelled on the product page as 'Shipped from our partner'.
These sellers are responsible for managing your order, including shipping, delivery, and customer service.
Delivery timeframes and costs may vary by seller, you'll see the details clearly displayed at checkout before you place your order.
For any questions about your marketplace order, please contact the seller directly via your account.
Items available on pre-order means our suppliers send stock to our warehouse once you've placed your order. Because of this, delivery times can vary from sale to sale.
To see exactly when your item will arrive, please check the estimated delivery date (ETA) shown on the product page, in your basket, and at checkout.
If you order from more than one sale, we'll automatically split your order and ship items separately as they become available, so you receive each piece as soon as possible.
Delivery Options
Economy Delivery (UK) — £3.99 Delivered within 4–7 working days of our warehouse receiving your item from the supplier.
Standard Delivery (UK) — £4.99 Delivered within 2–4 working days of our warehouse receiving your item from the supplier.
Delivery Options
Economy Delivery (UK) — £3.99 Delivered in 4–7 working days.
Standard Delivery (UK) — £4.99 Delivered in 2–4 working days.
Next Day Delivery (UK) — £7.99 Delivered the next working day on selected items. Terms & conditions apply.*
How Next Day Delivery Works
Upgrade your order to Next Day Delivery and receive your item(s) the next working day.
Orders placed by 9pm, Monday to Friday will arrive the next working day.
Scottish Highlands & Northern Ireland postcodes:
Orders placed between 9pm Friday and 2pm Sunday will be delivered on Tuesday if you live in the following areas: AB, BT, DD, EH, EX, FK, G, IV, IoM, KA, KY, ML, PA, PH, PL, TD, TR.
Remote postcodes (two working days): Our Next Day Delivery service takes two working days instead of one for the following postcodes: HS2, KW16–17, PA61–PA75, PA78, PH30, PH41–44, ZE2–3.
Ireland & The Channel Islands:
All orders to Ireland and the Channel Islands are eligible for standard delivery at a fixed fee of £7.95.
Channel Islands: Standard delivery in 3–4 days (£7.95), or Express delivery in 2 days (£9.50).
Republic of Ireland: Delivery within 7–10 days.
Unfortunately, Next Day Delivery is not available to Ireland or the Channel Islands.
